This 12 LED mist maker can add a stunning mist effect to your pond or water tank to filter the bad smell with electro and ultrasonic technology.You’ll put it in your pond, rockery,fishtank,vase, birdbath, and so forth.than it’s going to create a magical atmosphere.
Points for attention:
1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer.
2.Please make certain that the daily running time is less than 10 hours, differently the life of atomizing slice will be shorted.
3. Don’t touch the atomizing slice at the same time as the Mist Maker is working.
4. Ensure the water at top quality, use clean tap water.(water quality deterioration may influence the lifetime)
5. Please switch off the power before Movement or maintenance.
6. The atomizing slice is consumable,and its service life is=3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don’t wish to use any detergent).Keep it clean.
1 x Mist maker
1 x AC-DC adapter (US plug)
Note: The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles
Please do not use pure water and other non-oxygenated water to run this product!
Add great effects to your pond or swimming pool. Perfects to be used it in your pond, rockery, fishtank, vase, birdbath, and so forth, then it’s going to create a magical atmosphere.
With 12 LED (4 red + 4 yellow +4 blue) light, different color group LEDs are lightingup alternately. Easy to operate, put in the water and the voltage is 17V, then the mist appears. Ideal for indoor or outdoor fountains, water feature, and office use.
Mist Maker Size: 4.6 cm diameter, 27.5cm tall. Disc: 1.5cm. Output Voltage: 17V DC.
Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker), 3.5mm in diameter.
With a US AC/DC adapter. (1inch=2.54cm). Input: 110-250V, 50/60Hz. Output: DC 17V, 800mA. Note: please kindly read the suggestions below before the use of the product, if you meet any problem, please contact customer service for help